130-280KW Cummins Silent Generator Set

   Genset Model Products Name
MCS175S-2
 175KW Cummins Generator
MCS200S-2 200KW Cummins Generator
MCS250S-2 250KW Cummins Generator
MCS280S-2 280KW Cummins Generator
MCS320S-2 320KW Cummins Generator

General Features
Every generator set is subjected to a comprehensive test program which includes 50% load, 75% load, 100% load, 110% load and the checking and proving of all control and safety shut-down functions.
Equipped with battery charger and 24V high performance maintenance-free lead-acid starting batteries and connecting with cables.
Equipped with industrial silencer and flexible exhaust hose.
Equipped with 8-hours operation base tank;
Equipped with CHINT MCCB circuit breaker;
Designed to Comply with ISO8528/GB2820;
Powered by Cummins engine and coupled with Lisite alternator.

Benefits
Function stability credibility, service convenience;
Low operating cost results in optional economy;
Gets the job done wherever you are;
Ease of installation, operation and maintenance.

Dimension and Weight

Length(L) mm
 3200
 
Width(W) mm
 1130
 
Height(H) mm
 1700
 
Weight kg
 1580
 
Tank capacity  L
 300
 

Environment Condition

Environment temperature oC
 ≤50
 
Relative humidity %
 ≤90
 
Altitude m
 ≤1000
 

Prime Power:
This rating is for the supply of continuous electrical power (at variable load). There is no limit on the annual hours of operation and 10% overload power can be supplied for 1 hour in 12.
Standby power:
This rating is for the supply of continuous electrical power (at variable load) in the event of a utility power failure. No overload is permitted.
Rated voltage:
Available with customer requirements.

Genset Technical Data

Genset Technical Data
 
Prime power
 100 kVA
 
Standby power
 110 kVA
 
Rated speed
 1500 RPM
 
Output frequency
 50 Hz
 
Phase
 3
 
Noise dB(A) @7m
 70
 
Rated voltage
 400 V
 
Engine model
 6BT5.9-G1
 
Alternator model
 LYG274B
 
Fuel consumption of 100% load
 22 Litres/h
 
Fuel consumption of 75% load
 17 Litres/h
 
Voltage regulation rate
 ≤±1%
 
Random voltage variation
 ≤±1%
 
Frequency regulation rate
 ≤±5%
 
Random frequency variation
 ≤±0.5%
 

Engine Specifications

Engine model  6BT5.9-G1
 
Engine manufacturer
 Cummins
 
Number of cylinders
 6
 
Cylinder arrangement
 Vertical in-line
 
Cycle
 Four stroke
 
Aspiration
 Turbocharged
 
Bore×Stroke (mm×mm)
 102 x 120
 
Displacement (Liter)
 5.9
 
Compression Ratio
 17.5:1
 
Prime power/speed (kW/RPM)
 92/1500
 
Standby power/speed (kW/RPM)
 100/1500
 
Speed governor
 Mechanical
 
Cooling system
 Forced Water Cooling Cycle
 
Steady speed droop (%)
 ≤5%
 
Total lubrication system capacity (L)
 16.4
 
Coolant capacity (engine only) L
 9.1
 
Fuel consumption at 100% load (g/kWh)
 214 (at 1500RPM)
 
Starter motor
 DC24V,
 
Alternator
 AC24V
 

Alternator Specifications

Alternator model  LYG274B
 
Alternator manufacturer
 Lisite
 
Exciter type
 Single bearing, Brushless, Self-excited
 
Rated output prime power
 100 kVA
 
Rated speed
 1500 RPM
 
Rated frequency
 50 Hz
 
Phase
 3
 
Rated voltage
 400 V(Available with customer requirements)
 
Power factor
 0.8
 
Voltage adjust range
 ≥5%
 
Voltage regulation NL-FL
 ≤±1%
 
Insulation grade
 H
 
Protection grade
 IP22
 

Remark
Alternator option:
Other alternator manufacturer: Stamford, Leroy Somer, Marathon and Mecc Alte.

Control System DSE3110
All TAIZHOU YP Machinery Electronic Technology Co., Ltd series genset have a control cubicle (the deepsea controller DSE3110 as standard) mounted on a isolated support, which has the following features:
Electronic digital control module with monitoring/control facility and warning indicators;
Automatic shutdown protection
Emergency stop button (lock-down type)
AC output circuit breaker with over-current protection;
DC circuit control switch.
The control module gives digital readouts of:
Generator voltage;
Output frequency;
Engine speed;
Note:
1. The engine coolant temperature used temperature meter display;
2. The engine oil pressure used oil pressure meter display;
3. Generator current used current meter display and used change switch for each phase displayed